Blaupunkt Car Stereo System TRUE Manual Do Utilizador
12
If the USB data carrier is initially selected as
audio source, the data are read fi rst.
audio source, the data are read fi rst.
Notes:
• If the connected USB data carrier cannot
be seen, "USB ERROR" is briefl y displayed.
• The time required for reading in the data
depends on the design and size of the USB
data carrier.
data carrier.
Removing a USB data carrier
쏅 Switch off the car sound system so that the
data carrier will be correctly unregistered.
쏅 Disconnect the USB data carrier.
쏅 After you pulled off the data carrier from the
USB port at the front of the device, close the
protective cap of the USB port
protective cap of the USB port
:
.
Inserting/removing the memory card
Inserting the memory card
쏅 Detach the control panel.
쏅 Insert the memory card with its labelled side
up and its contacts fi rst into the card slot
B
until it clicks into place.
쏅 Attach the control panel.
After switch-on, the device automatically
selects the inserted memory card as audio
source. The data of the memory card are be-
ing read. Afterwards, the playback starts in
MP3 mode.
selects the inserted memory card as audio
source. The data of the memory card are be-
ing read. Afterwards, the playback starts in
MP3 mode.
Notes:
• If the inserted memory card cannot be
played, "SD ERROR" is briefl y displayed.
• The time required for reading the card
depends on the design and size of the
memory card.
memory card.
Removing the memory card
쏅 Detach the control panel.
쏅 Push on the memory card until it disengages.
쏅 Pull the memory card out of the card slot
B
.
쏅 Attach the control panel.
Selecting tracks
쏅 Turn rotary control
7
one notch counter-
clockwise or clockwise to change to the pre-
vious/next track.
vious/next track.
Notes:
• If you turn rotary control
7
several
notches counter-clockwise or clockwise,
you jump forward or reverse by the corre-
sponding number of tracks.
you jump forward or reverse by the corre-
sponding number of tracks.
• If the current track plays longer than 3
seconds and you turn rotary control
7
by
one notch counter-clockwise or clockwise,
the tracks starts playing again.
the tracks starts playing again.
Fast searching
쏅 Press the rotary control
7
once.
The display briefl y shows "CUE/REVIEW".
쏅 Turn the rotary control
7
until the desired
position has been reached.
Note:
If you press the rotary control
If you press the rotary control
7
twice, the
display briefl y shows "TRACK SELECT". By
turning the rotary control
turning the rotary control
7
, you select a
diff erent track.
Interrupting playback
쏅 Press the 3 button
>
to interrupt the
playback ("PAUSE") or to continue it.
Scanning all tracks
The scan function scans all available tracks.
쏅 Press the rotary control
7
for approx. 2 sec-
onds to start the scan, or briefl y to continue
playing the currently scanned track.
playing the currently scanned track.
During the scan, the display alternately dis-
plays "SCAN" and the current track number
or fi le name.
plays "SCAN" and the current track number
or fi le name.
Note:
The scan time can be adjusted (see the chap-
ter "User settings", section "Making settings
in the "VARIOUS" menu", menu item "SCAN
TIME").
The scan time can be adjusted (see the chap-
ter "User settings", section "Making settings
in the "VARIOUS" menu", menu item "SCAN
TIME").
CD/MP3/WMA/iPod mode