Benq Projector MW712 Manual Do Utilizador
Operation
41
Adjusting the sound level
To adjust the sound level, press Volume+/Volume- on the
remote control, or:
1.
remote control, or:
1.
Repeat steps 1-2 above.
2.
Highlight VOLUME and select a desired sound level.
Turning off the Power on/off ring tone
To turn off the ring tone:
1.
1.
Repeat steps 1-2 in Muting the sound section.
2.
Highlight Power on/off Ring Tone and select Off.
The only way to change Power on/off ring tone is setting On or Off here. Setting the sound mute
or changing the sound level will not affect the Power on/off ring tone.
Personalizing the projector menu display
The On-Screen Display (OSD) menus can be set according to your preferences. The
following settings do not affect the projection settings, operation, or performance.
following settings do not affect the projection settings, operation, or performance.
• Menu display time in the SYSTEM SETUP: Basic > Menu Settings menu sets
the length of time the OSD will remain active after your last key press. The time length
ranges from 5 to 30 seconds in 5-second increments. Use
ranges from 5 to 30 seconds in 5-second increments. Use
/
to select a suitable
time frame.
• Menu position in the SYSTEM SETUP: Basic > Menu Settings menu sets the
OSD position in five locations. Use
/
to select a preferred position.
• Language in the SYSTEM SETUP: Basic menu sets your familiar language for the
OSD menus. Use
/
to select your language.
• Reminder Message in the SYSTEM SETUP: Basic > Menu Settings menu sets
whether to display reminder messages on screen. Use
/
to select your desired
setting.
• Splash Screen in the SYSTEM SETUP: Basic menu sets a preferred logo screen
to be displayed during projector start-up. Use
/
to select a screen.