Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Biostar
  4. TA880G+
  5. Manual Do Proprietário

Biostar TA880G+ Manual Do Proprietário

Download
Página de 65
Motherboard Manual 
28 
Notices: 
Not all types of AMD CPU perform above overclock setting ideally; the difference will be based on the 
selected CPU model. 
B. Memory Integration Test (M.I.T.) 
This function is under “Overclocking Navigator Engine” item. 
MIT allows users to test memory compatibilities, and no extra devices or 
software are needed. 
Step 1 
The default setting under this item is “Disabled”; the condition parameter should 
be changed to “Enable” to proceed this test. 
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Chipset
T-Series
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
+-
F1
F10
ESC
T-Series Settings
=========== Automate OverClock System  ===========
============ Manual OverClock System ============
Notice: Please  Clear CMOS  if system  no display
            after overclocking.
> G.P.U Phase Control
OverClock Navigator              [Normal]
Auto OverClock System        [V6-Tech Engine]
CPU/HT Reference Clock (MHz) [200]
Spread  Spectrum                    [Disabled]
> Over-Voltage  Configuration
> CPU FID/VID Control
> Hyper Transport Configuration
> DRAM Timing Configuration
Integrated  Memory Test          [Disabled]
Exit
       Options
Enabled
Disabled
 
↓ 
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Chipset
T-Series
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
+-
F1
F10
ESC
T-Series Settings
=========== Automate OverClock System  ===========
============ Manual OverClock System ============
Notice: Please  Clear CMOS  if system  no display
            after overclocking.
> G.P.U Phase Control
OverClock Navigator              [Normal]
Auto OverClock System        [V6-Tech Engine]
CPU/HT Reference Clock (MHz) [200]
Spread  Spectrum                    [Disabled]
> Over-Voltage  Configuration
> CPU FID/VID Control
> Hyper Transport Configuration
> DRAM Timing Configuration
Integrated  Memory Test          [Enabled]
Exit
       Options
Enabled
Disabled
 
Step 2 
Save and Exit from CMOS setup and reboot the system to activate this test.   
Run this test for 5 minutes (minimum) to ensure the memory stability. 
Step 3 
When the process is done, change the setting back from “Enable” to “Disable” 
to complete the test.