Billy Goat F012507A Manual Do Utilizador

 

 

Part No 840186 

14 

Form No F012507A 

3.  Secure the unit with left hand at the handle then pull starter rope with right hand to start engine. 
 

 

 
 

 

PULL STARTER CORD slowly until resistance is felt. Then pull cord rapidly to avoid 
kickback.

 

 
4.  Move throttle control back to RUN position and allow engine to reach correct operating speed. 
 

 
FOR MAXIMUM PICKUP:  Adjust nozzle height as close to debris as possible, but without blocking airflow into 
the nozzle. NOTE: Never bury nozzle into debris. The vacuum nozzle is raised and lowered by turning the crank 
handle clockwise and counter-clockwise. 
 

 

 

 

SECURE UNIT AT 
THE HANDLE 
WITH LEFT HAND 
DURING START 

PULL ROPE 
STARTER WITH 
RIGHT HAND