Benq MP623 Manual Do Utilizador

Connection

21

Connecting a Component Video source device

Examine your Video source device to determine if it has a set of unused Component Video 
output sockets available: 

•

If so, you can continue with this procedure.

•

If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to a Component Video source device:

1.

Take a Component Video to VGA (D-Sub) adaptor cable and connect the end with 3 
RCA type connectors to the Component Video output sockets of the Video source 
device. Match the color of the plugs to the color of the sockets; green to green, blue to 
blue, and red to red.

2.

Connect the other end of the Component Video to VGA (D-Sub) adaptor cable (with 
a D-Sub type connector) to the D-SUB/COMP. IN socket on the projector.

3.

If you wish to make use of the projector (mixed mono) speaker in your presentations, 
take a suitable audio cable and connect one end of the cable to the audio output socket 
of the device, and the other end to the AUDIO socket of the projector. 
Once connected, the audio can be controlled by the projector On-Screen Display 
(OSD) menus. See 

 for details.

The final connection path should be like that shown in the following diagram:

•

The projector is only capable of playing mixed mono audio, even if a stereo audio input is 
connected. See

 for details.

•

If the selected video image is not displayed after the projector is turned on and the correct video 
source has been selected, check that the Video source device is turned on and operating 
correctly. Also check that the signal cables have been connected correctly.

AV device

Component Video to VGA 
(D-Sub) adaptor cable 

Audio 
cable