Behringer Virtube VT15FX Manual Do Proprietário
7
VIRTUBE VT30FX/VT15FX/VT15CD User Manual
For practising in the rehearsal room or at home, please wire your VIRTUBE as
shown in fig. 3.1. Connect a CD player or drum computer to the CD IN input.
If you want to practice with headphones, connect your headphones to the
LINE OUT/PHONES jack. The built-in loudspeaker will be muted automatically.
Connect the dual footswitch supplied with the unit to the FOOTSWITCH jack
on the VIRTUBE. The CHANNEL footswitch switches between the channels.
The IN/OUT footswitch turns the effect on and off (VT30FX only).
4. Installation
Except for the INPUT jack (1/4" TS), all audio inputs and outputs of the BEHRINGER
VIRTUBE are on 1/4" TRS connectors. Please see Chapter 5, “Specifications” for
more information.
◊
Please ensure that the unit is installed and operated only by people
qualified to do so. During installation and operation the user must have
sufficient electrical contact to earth. Electrostatic discharge may affect
the operation of the unit.
qualified to do so. During installation and operation the user must have
sufficient electrical contact to earth. Electrostatic discharge may affect
the operation of the unit.
strain relief clamp
sleeve
tip
sleeve
(ground/shield)
Unbalanced ¼" TS connector
tip
(signal)
Fig. 4.1: 1/4" TS connector
strain relief clamp
sleeve
ring
tip
sleeve
ring
tip
sleeve
ground/shield
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Balanced ¼" TRS connector
ring
cold (-ve)
tip
tip
hot (+ve)
Fig. 4.2: 1/4" TRS connector
R
L
R
L
ring
tip
sleeve
tip
tip
sleeve
sleeve
Fig. 4.3: Stereo adapter cable
sleeve
sleeve
tip
tip
Fig. 4.4: Mono adapter cable