Behringer Electronic Keyboard EG8280USB Manual Do Utilizador

behringer.com

EUROGRAND EG2280USB/EG8280USB User Manual

Use this function to set the receive channel on which the EG2280USB/EG8280USB 
is to receive MIDI data. MIDI devices must transmit and receive on the same MIDI 
channels to ensure successful MIDI communication. Select the default setting 
ALL

 for proper operation in combination with a music computer.

Function: 

E7.2

Value: 

All, 1-2, 1 . . . 16

All:

 

Simultaneous multi-timbral reception of MIDI data 
on all 16 MIDI channels. Also known as "Omni" mode. 
(Default setting)

1-2:

 

Reception of MIDI data on channels 1 and 2

1 . . . 16:

 

Reception of MIDI data on the specified MIDI channel

This function allows you to determine whether the built-in sound generator 
directly plays the notes you play on the keyboard or whether it only responds to 
MIDI note information received via the MIDI IN jack. The latter setting is quite 
useful, for example, in sequencer mode. A closed MIDI chain may cause the 
EG2280USB/EG8280USB to play the same sound twice, before and after it is sent 
to an external device. 

When the EG2280USB/EG8280USB is set to Local Off, the MIDI data is only sent to 
the sequencer. The notes are played only once when the MIDI signals come back 
from the sequencer.

Function: 

E7.3

Value: 

On, Off

On:

 

Sound generator responds to keyboard and MIDI notes 
(default setting)

Off:

 

Sound generator does not respond to the keyboard but to MIDI 
notes only

Use this function to determine how the EG2280USB/EG8280USB responds to 
MIDI program change commands. These commands are used, for example, 
to select sounds of the EG2280USB/EG8280USB using MIDI commands sent from a 
sequencing program. Conversely, program change commands can be sent via the 
MIDI output of the EG2280USB/EG8280USB whenever you select a sound in the 
TONE section (see chapter 9.2).

E7.4

Value: 

On, Off

On:

 

Program change commands are sent and received 
(default setting)

Off:

 

Program change commands are neither sent nor received

Use this function to determine how the EG2280USB/EG8280USB responds to MIDI 
controller data. MIDI uses a variety of controller informaiton to control sound 
changes (e.g. pedal status, volume, effect intensity).

Function: 

E7.5

Value: 

On, Off

On:

 

Controller data are sent and received (default setting)

Off:

 

Controller data are neither sent nor received

This function determines whether outgoing MIDI data are transposed 
independently of the built-in sound generator. This can be useful to play the 
sounds of an external sound module whose sound generator is controlled from 
the keyboard of the EG2280USB/EG8280USB in a different pitch than the internal 
sounds of the EG2280USB/EG8280USB.

Function: 

E7.6

Value: 

-12 . . . 12

0:

 

No transposition of the pitch at the MIDI output 
(default setting)

1 . . .12:

 

Pitch is transposed up by the number of halftones selected

-1 . . . -12:

 

Pitch is transposed down by the number of halftones selected

Use this function to transmit the current settings of the EG2280USB/EG8280USB 
(e.g. sounds and effects, channel volume) via the MIDI output. This type of 
transmission only includes system-exclusive data packages (MIDI dump).

Function: 

E7.7

Value: 

-

Connect the EG2280USB/EG8280USB to 

1) 

a computer or hardware sequencer as 
described in chapter 6.3.2.

Set the MIDI sequencer to  

2) 

reception-ready mode. 

Select the function 

3) 

E7.7

 in EDIT mode. 

Press the +/YES button to execute 

4) 

the transmission.

When the transmission is complete, the display shows End.