Behringer Europower PMP960M Manual Do Proprietário
9
EUROPOWER PMP1680S/PMP980S/PMP960M User Manual
◊
Please use a dual footswitch for the PMP980S/PMP1680S, so that you
can enable/disable FX 1 and FX 2 independently of each other. In this
case, the tip of the ¼" plug controls FX 1, and the ring FX 2.
can enable/disable FX 1 and FX 2 independently of each other. In this
case, the tip of the ¼" plug controls FX 1, and the ring FX 2.
Fig. 4.5: RCA cable
shield
sleeve
sleeve
tip
tip
4.3 Loudspeaker connection
Your PMP mixer is equipped with high-quality twist-lock professional style
loudspeaker connectors, which ensure safe and trouble-free operation.
This connector was especially developed for high-power loudspeakers. Once it is
plugged in, it safely locks into position and cannot be accidentally disengaged.
It prevents the occurrence of electrical shock and ensures the correct polarity.
Each of the connectors carries only the assigned single signal (see tab. 4.1/fig. 4.7
and the information on the rear panel of the power mixer).
Fig. 4.6: Professional twist-lock style connector
1-
2-
2+
1+
1-
2-
2+
1+
front view
rear view
Professional speaker connector
(compatible with Neutrik Speakon connectors)
Please be sure to only use professional locking-style speaker cables (type NL4FC).
Please check the pin connections of your loudspeakers and cables depending on
the EUROPOWER speaker output you choose.
EUROPOWER PMP980S/PMP1680S
OUPUT A
1+
1-
2+
2-
MAIN L
POS
NEG
–
–
MON
POS
NEG
–
–
OUTPUT B
–
–
POS
NEG
OUTPUT B
1+
1-
2+
2-
MAIN R
POS
NEG
–
–
MONO
POS
NEG
–
–
BRIDGE
POS
–
NEG
–
EUROPOWER PMP960M
OUTPUT A
1+
1-
2+
2-
MAIN MONO
POS
NEG
–
–
MON
POS
NEG
–
–
BRIDGE
–
–
–
–
OUTPUT B
1+
1-
2+
2-
MAIN MONO
POS
NEG
–
–
MAIN
POS
NEG
–
–
BRIDGE
POS
–
NEG
–
Tab 4.1: Pin connections of loudspeaker connectors
OUTPUT B
BRIDGE
1+
1+
2+
1+
1-
1-
8 Ω
4 Ω
8 Ω
4 Ω
16 Ω
8 Ω
OUTPUT B
Fig. 4.7: Connector assignment