BEA Spotfinder Infrared Zone Locator Folheto

INFRARED ZONE LOCATOR

75.0176.04 

 

 

20080331 

        

Page 

1 

of 

2

 BEA’s Infrared (IR) Spotfi nder is a 

hand-held tool used to locate an 
active infrared source.

 This easily locates an IR area 

which can be used to assist in the 
palcement of the sensing zone as 
well as approximate the distance 
from a sensor.

 The Spotfi nder has two settings, 

(1) LED only (light, no sound) or 
(2) LED and Buzzer.

 This accessory will shut-off after 

45 seconds of no IR activity.  To 
reactivate, switch OFF then back 
ON by selecting either LED or 
BUZZER.

POSITION

LED COLOR

BUZZER LEVEL

IR LIGHT LEVEL

1

GREEN

NONE

NONE

2

ORANGE

SOFT - WEAK

LOW

3

RED

LOUD -  STRONG

HIGH

N/A

FLASHING ORANGE

LOW BATTERIES

DESCRIPTION

SPECIFICATION

POWER SUPPLY

AAA Alkaline Batteries (2) Included

DIMENSIONS      

3” X 2 1/4” X 1” (76mm x 57mm x 25mm)

MATERIAL

ABS Plastic

For sliding door overhead presence detection, place the Spotfi nder fl at on the fl oor so that the IR-SPOT is at the appropriate 
distance from the door face.  Adjust the IR Curtain on the sensor until the LED turns Orange and/or the Buzzer begins to beep
(as in Position 2 below).   

NOTE:  The Spotfi nder only serves to identify an area of infrared light and not necessarily imply the area of the sensors detection.  

BEA, Inc. always recommends a walk test to ensure compliance to all applicable standards for sensing patterns.