Bay Technical Associates RM356 Manual Do Utilizador
Router Configuration
3-1
Chapter 3
Router Configuration
This chapter contains information about configuring your Model RM356 Modem Router through
the built-in Manager interface.
the built-in Manager interface.
Configuration Methods
If you are using a PC, you have the following two options to configure your router:
•
Through FirstGear
FirstGear is an easy-to-use Windows-based utility that leads you through a Quick Setup or
an Advanced menu for configuring your router. For FirstGear instructions, refer to Getting
Started Using FirstGear for the Model RM356 Modem Router.
an Advanced menu for configuring your router. For FirstGear instructions, refer to Getting
Started Using FirstGear for the Model RM356 Modem Router.
•
Through the built-in Manager interface
If you are using a Macintosh or UNIX-based workstation, the built-in Manager interface is the
only way that you can configure your router through your computer. However, you can use a
PC to configure the router and then connect the router to the Macintosh or workstation after the
configuration process is complete.
only way that you can configure your router through your computer. However, you can use a
PC to configure the router and then connect the router to the Macintosh or workstation after the
configuration process is complete.
The built-in Manager interface is accessible through either a serial or a Telnet connection (refer to
” or
” on
of
”). If the router has not previously been assigned
an IP address, you cannot connect through a Telnet session. You must use a serial connection.