Baxi Potterton Boiler Manual Do Utilizador
8.0 Emergency
11
© Baxi Heating UK Ltd 2008
Gas Tap
Heating Flow, Heating
Return and Mains Water
Inlet Isolating Valves
Fig. 6
In an Emergency
If a water or gas leak occurs or is suspected, the boiler can
be isolated at the inlet valves as follows;
be isolated at the inlet valves as follows;
1. Using a suitable open ended spanner, turn the square
nut on the gas tap through 90° (
nut on the gas tap through 90° (
1
/
4
turn) to isolate the gas
supply at the boiler (Fig. 6).
3. The water isolating valves are positioned under the
boiler and can be closed by turning their taps to the right
towards the wall (Fig. 6).
boiler and can be closed by turning their taps to the right
towards the wall (Fig. 6).
4. Call your Installer or Service Engineer as soon as
possible.
possible.
IMPORTANT
This boiler operates on LPG (Propane). Familiarise
yourself with any control and isolation valves. If in
doubt consult your installer about the operation of
these devices.
yourself with any control and isolation valves. If in
doubt consult your installer about the operation of
these devices.
If you smell gas
Turn off the gas supply and call your gas supplier
immediately. It is possible to isolate the boiler at the
isolating valve (Fig. 6).
immediately. It is possible to isolate the boiler at the
isolating valve (Fig. 6).
Faulty boiler
If it is known or suspected that a fault exists
on the boiler, it must not be used until the fault
has been corrected by a competent person.
on the boiler, it must not be used until the fault
has been corrected by a competent person.
Warning !