Britax FRONTIER 85 Manual Do Utilizador

Locate the LATCH anchors in

your vehicle.

Ensure harness height is

adjusted to fit your child.

Rotate the positioning block to

the front and place the child

seat on the vehicle seat.
Verify that the LATCH strap is

not twisted and firmly press

the LATCH connectors onto

their adjacent LATCH anchors

to attach.
Push the child seat into the

vehicle seat and pull the end

of the LATCH strap through

the belt slot to secure.

The child seat is secure when it

cannot be moved front-to-back

or side-to-side more than 1 in.

(2.5 cm) at the belt path. If the

child seat is not secure, repeat

the installation procedure or

use a different seating location.

Firmly press the Versa-Tether

hook to the vehicle tether

anchor to attach. Remove all

slack from the tether webbing.
Use the elastic strap to contain

extra webbing.

Checklist

Check that positioning block is rotated to the front.

Check all connections and verify that child seat is secure.

The child seat is secure when it cannot be moved front-to-

back or side-to-side more than 1 in. (2.5 cm) at the belt path.

If the child seat is not secure, repeat the installation procedure

or use a different seating location.

Ensure any excess Versa-Tether

webbing is stored in elastic

band. Always ensure any excess webbing is contained within

your vehicle.

<1 in.

Check Versa-Tether

(Top Tether) attachment

Check that Versa-Tether

(Top Tether) webbing is

stored in elastic band

Check LATCH

connector attachments

Check that the

Positioning Block is

rotated to the front

Check that there is

LESS than 1 in. (2.5 cm)

of movement (front to back

or side to side) at the belt path

Installing the Child Seat: Harness Mode