Boss Audio Systems MR218OUA Manual Do Utilizador

 

13

 

Before going through the checklist, check wiring connection. If any of the problems 
persist after checklist has been made, consult your nearest service dealer. 

 No power. 

The ignition switch is not 
on. 

If the power supply is 
connected to the car accessory 
circuits, but the engine is not 
moving, switch the ignition key 
to “ACC”. 

 

The fuse is blown. 

Replace the fuse. 

Disc cannot be 
loaded or 
ejected. 

Presence of CD disc 
inside the player. 

Remove the disc in the player, 
then put a new one. 

 

Inserting the disc in reverse 
direction. 

Insert the compact disc with the 
label facing upward. 

 

Compact disc is extremely 
dirty or defective. 

Clean the disc or try to play a new 
one. 

Temperature inside the car 
is too high. 

Cool off until the temperature 
returns to normal. 

 

Condensation. 

Leave the player off for an hour or 
so, then try again. 

No sound.     

Volume is in minimum 

Adjust volume to a desired level. 

 

Wiring is not properly 
connected. 

Check wiring connection. 

Sound skips. 

The installation angle is 
more than 30 degrees. 

Adjust the installation angle less 
than 30 degrees. 

 

The disc is extremely 
dirty or defective. 

Clean the compact disc, then try to 
play a new one. 

The operation 
keys do not 
work. 

The built-in microcomputer 
is not operating properly 
due to noise. 

Press the RESET button. 
Front panel is not properly fixed into 
its place. 

The antenna cable is not 
connected. 

Insert the antenna cable firmly. 

The radio does 
not Work. The 
radio station 
automatic 
selection does 
not work. 

The signals are too weak. 

Select a station manually.