Bosch AG Computer Accessories R911310079 Manual Do Utilizador

DOK-SUPPL*-VSB*40.1***-PR02-EN-P

8.  Fasten the plug-in assembly with the screw, with which the extension

card was fixed.

84_neueKarte2.JPG

Fig. 8-17:

Fix the new PCI card with the screw

9.  Close the top cover and fasten it with the two screws.

If the card is equipped with a Plug and Play (PnP) function, it is
automatically recognized by the operating system and integrated in the
system, provided that no hardware conflicts (IRQ etc.) with other
extension cards or connected devices occur.

In the event that after a system reboot the functions based on the new
card are not available, there may be several reasons:

•

  The card is not properly seated in the PCI slot.

•

  The driver software of the card has not been installed or its installation

is faulty.

•

  IRQ (Interrupt) conflict with other PC hardware components.

•

  The software of the card has not been installed.

⇒

Consider the specifications of the card manufacturer.
It might be required to set new configurations in the
BIOS and in the operating system (e.g. Windows XP
Control Panel).

If the BIOS settings have to be changed, you will find the required
information in the manual about the used motherboard delivered with the
VSB 40.1 and, if necessary, in the documents about the PCI card
mounted by yourself.