Bosch 4100 Manual Do Utilizador

To prevent personal injury, always disconnect
plug from power source before attaching or

removing the Smart Guard System.

1. Remove table insert using finger hole.

2. Raise the blade as high as it will go and set it perpendicular to

table (0° on bevel scale) (Fig. 5).

3. Rotate the riving knife release lever 

1 clockwise, so that it

points upward (Fig. 5).

4. Pull riving knife 

2 towards release lever to disengage it from

the pins 

3.

5. Slide the riving knife 

2 up to its highest position, so that it is

directly over the center of the blade (Fig. 6).

6. Align holes in riving knife with pins 

3 and lock the release lever

1 by rotating it counterclockwise. Push/pull riving knife to verify
that it is locked in place (Fig. 6). 

7. Replace table insert  (Fig. 7).