Blomberg TROCKNER TAF 7230 A Manual Do Utilizador

Página de 44
15 - EN
start the program.
2.  “Start/Pause/Cancel” button will light
up to indicate that the program has 
started.
Progress of program
Progress of a running program is shown
through the program follow-up indicator.
At the beginning of every program step, 
the relevant indicator lamp will light up and 
light of the completed step will turn off.
"Drying":
- Drying level will be illuminated during 
the whole drying process until the drying 
degree reaches "iron dry".
"Iron Dry":
- Starts to illuminate when the drying 
degree reaches "iron dry" step and remains 
illuminated until the next step.
" Cupboard Dry":
- Starts to illuminate when the drying degree 
reaches " Cupboard dry" step and remains 
illuminated until the next step.
“Cooling”:
- It lights up during the 4-minute cooling 
phase at the end of drying.
“Final / Anti-creasing”:
- Illuminates when the program comes 
to an end and anti-creasing function is 
activated.
Important:
If more than one LED light up or flash 
concurrently, it means there is malfunctioning 
or a failure (please see, Solution 
suggestions for problems).
Changing the program after the 
program has started
You can use this feature after your machine
has started to dry your clothes under higher 
or lower temperatures.
For example;
Press and hold the “Start/Pause/Cancel”
button for about 4 seconds to “Cancel”
the program in order to select “Extra Dry”
program instead of “Iron Ready” program.
Select the “Extra Dry” program by rotating the
program knob.
Press "Start/Pause/Cancel" button to start
the program.
C
  The program which is selected first will 
go on even if the program selection 
button is moved and another program 
mode is selected while the machine is 
operating. You must cancel the ongoing
program in order to change the drying 
program. (See, Ending the program 
through canceling)
Adding/removing laundry in standby 
mode
In order to add or take out laundry after the 
start-up of the program;
1.  Press the “Start/Pause/Cancel” button
to switch the machine to “Pause” mode.
Drying process will stop.
2.  Open the door at Pause position and
close it again after adding or taking out 
laundry.
3.  Press "Start/Pause/Cancel" button to
start the program.
C
   Any laundry added after the drying 
process was started may cause the 
already dried clothes in the machine 
intermingle with wet clothes and the 
result will be wet laundry after the drying 
process is over.
C
   Laundry may be added or taken out 
as much as desired during a drying 
process, but as this process will interrupt 
drying continuously, it will extend 
the program duration and increase 
energy consumption. Therefore, it is 
recommended to add laundry before the 
drying program is started.
Child-proof lock
There is a childproof lock to prevent any 
program interruption due to the pressing 
of keys while the program is on. In order 
to activate the childproof lock, press on 
the “Audio Warning” and “time delay”
buttons simultaneously for 2 seconds. The 
“Childproof lock” will be activated and a
warning led will light up.
To start a new program after the program 
is over or to interrupt the program, the