Blade ICE RACKSWITCH G8124-E Manual Do Utilizador

BLADEOS 6.5.2 Application Guide

210

Chapter 14: FCoE and CEE

BMD00220, October 2010

This example can be configured using the following commands:

Turn CEE on.

Note –

Turning CEE on will automatically change some 802.1p QoS and 802.3x standard flow

control settings and menus (see

Configure each allocated priority group with a description (optional), list of 802.1p priority values,
and bandwidth allocation:

Configure the strict priority group with a description (optional) and a list of 802.1p priority values:

Note –

Priority group 15 is permitted unlimited bandwidth. As such, the commands for priority

group 15 do not include bandwidth allocation.

Save the configuration.

RS G8124(config)# cee enable

RS G8124(config)# cee global ets priority-group 2 priorities 0,1,2

(Select a group for regular LAN, and
set for 802.1p priorities 0, 1, and 2)

RS G8124(config)# cee global ets bandwidth 2 10

(Restrict to 10% of link bandwidth)

RS G8124(config)# cee global ets priority-group 2 description

"Regular LAN"

(Set a group description—optional)

RS G8124(config)# cee global ets priority-group 3 priorities 3

(Select a group for SAN traffic, and
set for 802.1p priority 3)

RS G8124(config)# cee global ets bandwidth 3 20

(Restrict to 20% of link bandwidth)

RS G8124(config)# cee global ets priority-group 3 description "SAN"

(Set a group description—optional)

RS G8124(config)# cee global ets priority-group 4 priorities 4

(Select a group for latency traffic,
and set for 802.1p priority 4)

RS G8124(config)# cee global ets bandwidth 4 30

(Restrict to 30% of link bandwidth)

RS G8124(config)# cee global ets priority-group 4 description

"Biz-Critical LAN"

(Set a group description—optional)

RS G8124(config)# cee global ets priority-group 15 priorities 7

(Select a group for strict traffic, and
Set 802.1p priority 7)

RS G8124(config)# cee global ets priority-group 15 description

"Network Management"

(Set a group description—optional)