Belkin F1DC108BxxSR Manual Do Utilizador
section
1
2
3
4
5
6
7
8
19
19
Using your LCD Rack Console
Using your LCD Rack Console
Now that you have connected your console and servers to your LCD Rack
Console, it is ready for use. Select connected servers through the On-Screen
Display; or by using hot-key commands through the console keyboard. It
takes approximately 1–2 seconds for the video signal to refresh after switching
servers. Re-synchronization of the mouse and keyboard signals also occurs.
This is normal operation and ensures that proper synchronization is established
between the console and the connected servers.
Note: For security reasons and to conserve energy, the LCD Rack Console has
been designed to run off the console monitor after 10 minutes of inactivity. Press
any key on the console keyboard to turn on the monitor. If security is enabled in
the OSD, you will be prompted to enter a user name and password.
Console, it is ready for use. Select connected servers through the On-Screen
Display; or by using hot-key commands through the console keyboard. It
takes approximately 1–2 seconds for the video signal to refresh after switching
servers. Re-synchronization of the mouse and keyboard signals also occurs.
This is normal operation and ensures that proper synchronization is established
between the console and the connected servers.
Note: For security reasons and to conserve energy, the LCD Rack Console has
been designed to run off the console monitor after 10 minutes of inactivity. Press
any key on the console keyboard to turn on the monitor. If security is enabled in
the OSD, you will be prompted to enter a user name and password.