Belkin F1DC108BxxSR Manual Do Utilizador

30

30

5.    Apply power to the LCD Rack Console. The KVM Switch will enter into  

flash-upgrade mode and wait for the data to upgrade. 

6.    Click “Write Flash” to start the upgrade. The upgrade process takes about  

six seconds. You should see “WRITE OK” display when the upgrade 
completes successfully.

7.    Disconnect the Serial Flash Cable, 

POWER OFF the KVM Switch, set the 

DIP switch back to the Normal Run Operation position “ON, ON”, and 
then power on the LCD Rack Console. The LCD Rack Console should be 
running on the new firmware. The OSD will display the FW version in the 
bottom-right corner of the “Main Menu” page.