Behringer FCB1010 Manual Do Proprietário

MIDI FOOT CONTROLLER FCB1010 User Manual

SysEx dumps 
The FCB1010 allows you to transmit PRESETS in the form of system-exclusive 

data to a sequencer or other MIDI recorder. In this way, you can save your data or 

manage several MIDI set-ups (e.g. studio equipment, guitar equipment, etc.).
If you wish to save your data on an external sequencer/computer, please follow 

the instructions below:

Connect the MIDI OUT of your FCB1010 to the MIDI IN of your 

sequencer/computer (see fig. 2.5)

Keep the DOWN switch pressed roughly 2.5 sec during power-up to enter the 

GLOBAL CONFIGURATION menu.

Press UP until the CONFIGURATION LED lights up. Now the unit is in 

CONFIGURATION mode.

Start the RECORD function on your sequencer/computer. The footswitch 

LED lights up and is no longer lit up when all SysEx data from the FCB1010 

have been transmitted. Then press footswitch #6 to dump the FCB1010 

data. Quit the GLOBAL CONFIGURATION menu by means of a long press on 

DOWN/ESCAPE.

Midi In

Midi Out

MIDI FOOT CONTROLLER FCB1010

Fig. 2.5: Sending a SysEx-Dump

2.7.2  Receiving SysEx dumps
To send back FCB1010 data stored on a sequencer/computer before, please follow 

the instructions below:

Connect the MIDI OUT connector of your sequencer or computer to the 

MIDI IN connector of the FCB1010 (see fig. 2.6).

Keep the DOWN switch pressed during power-up to enter the 

GLOBAL CONFIGURATION menu.

Press UP until the CONFIGURATION LED lights up. Now the unit is in 

CONFIGURATION mode.

Press footswitch #7 (SYSEX RCV) to “tell” the FCB1010 to wait for system-

exclusive data (the footswitch LED lights up). Start the PLAYBACK function 

on your sequencer/computer to play back the previously stored file. The foot- 

switch LED flashes while the FCB1010 is receiving data. Once the data have 

been received correctly, the LED dies out. Now your programs are back in the 

FCB1010’s memory. Quit GLOBAL CONFIGURATION mode by means of a long 

press on DOWN.

MIDI FOOT CONTROLLER FCB1010

Midi Out

Midi In

Fig. 2.6: Receiving a SysEx dump

This function allows you to restore factory defaults of your FCB1010. 

Resetting your FCB1010 lets you restore various default settings that are 

optimized for use with BEHRINGER audio equipment. This is why there are three 

different key combinations that let you reload the desired defaults into the 

memory of your FCB1010. This key combinations are shown in table 2.5: 

1 + 6

V-AMP family products

1 + 7

BEHRINGER guitar amps

1 + 8

BASS V-AMP product range 

Tab. 2.5: Reset key combinations