Balay 3TI60081A Instrução De Instalação

13

 Set the programme selector to the desired programme, 

e.g. resistentes algod. (Cottons) 60°C.

 The 

lavado (wash) (preparado (ready)) indicator light flashes 

 Where required, reduce the spin speed or select $ 

flot (Rinse stop) 

 page 12.

 Load the laundry  page 8.

– Observe the maximum load, 

Programme table  page 27.

 Press the 

! 

inicio/pausa (Start/Pause) button.

– The washing programme starts.
– The lavado (wash) indicator light lights up.

The washing programmes are automatically ended.

 Set the programme selector to 

stop (Off).

 Remove the washing from the drum.
 Leave the loading door open in order that the inside of the washing 

machine can dry.

 Turn off the water tap.

If the spin function was deactivated at the start of washing,
$ 

flot (Rinse stop) (Without final spin = laundry remains in the last water 

used for rinsing), the washing programme is stopped after the last rinse. 

In order to drain the rinsing water and, if required, spin the laundry:

 Set the programme selector to 

C

 (spin). 

- By pressing the 

&

 

centrif. button, the spin speed can be reduced by 

200 rpm. The water is emptied and the washing machine spins. 

The maximum spin speed depends on the selected washing programme.

If you do not wish to spin the laundry:

 Set the programme selector to 

t

/D

 (Empty). The water is emptied 

but the washing machine does not spin. The programme has finished 
when the fin/fim (finished) indicator light flashes.

 Set the programme selector to 

stop (Off).

 Remove the laundry.

 Leave the loading door open in order that the inside of the washing 

machine can dry.

You have selected an incorrect programme by mistake:
 Select the programme again and press


! 

inicio/pausa (Start/Pause). The new programme starts from the 

beginning. 

$