Bags and Gloves E-9220T Manual Do Utilizador

www.gateway.com

Chapter 2: Setting Up Your Server

To make sure that your working environment is safe:

■

Use a clean, dry, flat, stable surface for your server. Allow at least 6 inches at the 
back of the server for cabling and air circulation.

■

Use the instructions on your server’s setup poster to set up your hardware.

■

Use an uninterruptible power supply (UPS) with surge protection for protection 
from power outages and power spikes.

■

Avoid subjecting your server to extreme temperature changes. Do not expose your 
server to direct sunlight, heating ducts, or other heat-generating objects. Damage 
caused by extreme temperatures is not covered by your warranty. As a general rule, 
your server is safest at temperatures that are comfortable for you.

■

Keep your server and magnetic media away from equipment that generates 
magnetic fields, such as unshielded stereo speakers. Strong magnetic fields can erase 
data on both diskettes and hard drives. Even a telephone placed too close to the 
server may cause interference.

Your server comes with a 3-wire AC power cords fitted with the correct 
plug style for your region. If these plugs do not match the connector 
on your UPS or wall outlet, do not attempt to modify the plugs in any 
way. Use a UPS or wall outlet that is appropriate for the supplied 
AC power cords.