Bags and Gloves E-9220T Manual Do Utilizador
61
www.gateway.com
Replacing the system board
Replacing the system board
To replace the system board:
1
Follow the instructions in
.
2
Follow the instructions in
3
Remove the processor air duct by following the instructions in
4
Remove the memory modules by following the instructions in
5
Remove all of the expansion cards by following the instructions in
6
Remove the heat sink and processor by following the instructions in
7
Disconnect the power and data cables from the system board, noting their locations
and orientation. (You will reconnect the cables after you install the new board.)
and orientation. (You will reconnect the cables after you install the new board.)