Bags and Gloves E-9220T Manual Do Utilizador
69
www.gateway.com
Resetting the BIOS
9
Follow the instructions in
.
10
Reconnect the power cords and turn on the server. The BIOS memory is cleared.
11
Turn off the server, then disconnect the power cords and all other cables connected
to the server.
to the server.
12
Follow the instructions in
13
Place the jumper back onto pins 1-2.
14
Follow the instructions in
.
15
Turn on the server. A message appears saying that the CMOS Date and Time are not set.
16
Press F1 to reset the BIOS to factory default settings.
Resetting BIOS passwords
To reset BIOS password(s), you must either reset and clear all BIOS settings, or use the
Password Clear jumper. To reset BIOS passwords, follow the instructions in
Password Clear jumper. To reset BIOS passwords, follow the instructions in
To clear the BIOS password(s):
1
Turn off the server, then disconnect the power cords and all other cables connected
to the server.
to the server.
2
Follow the instructions in
Caution
Moving the jumper while the power is on can damage your server.
Always turn off the server and unplug the power cords and all other
cables before changing the jumper.
Always turn off the server and unplug the power cords and all other
cables before changing the jumper.