Woodstock W1681 Manual Do Utilizador

-6-

W1681 Buffing Assembly

Keep machine disconnected from

power until instructed otherwise.

This machine has been carefully packaged for safe

transportation. If you notice the machine has been

damaged during shipping, please contact your authorized

Shop Fox dealer immediately.

Unpacking

SETUP

The following is a description of the main components

shipped with the Model

W1681. Lay the components out

to inventory them.

Note: If you can't find an item on this list, check the

mounting location on the machine or examine the

packaging materials carefully. Occasionally we pre-install

certain components for safer shipping.

Box Inventory

Qty

A. Buffing Assembly* ..........................................1

B. V-Belt ........................................................1

C. Wheel Flanges ..............................................4

D. Arbor Nuts ..................................................4

*Motor and motor pulley are not included.

Inventory

Cleaning Machine

The shafts of your buffer are coated with a waxy grease

that protects them from corrosion during shipment. Clean

this grease off with a solvent cleaner or citrus-based

degreaser. DO NOT use chlorine-based solvents such as

brake parts cleaner or acetone—if you happen to splash

some onto a painted surface, you will ruin the finish.

ALWAYS work in well-

ventilated areas far from

possible ignition sources

when using solvents to

clean machinery. Many

solvents are toxic when

inhaled or ingested. Use

care when disposing

of waste rags and

towels to be sure they

DO NOT create fire or

environmental hazards.