West Bend 84966 - Versatility Cooker Manual Do Utilizador

Página de 44
To Use as a Slow Cooker: 
1.  Place heating base on dry, level, heat-resistant surface away from any edge. 
2.  Place foods into cooking pot, cover and place cooking pot onto heating base. If 
you wish to brown or precook any foods before slow cooking, place cooking pot 
directly on range top over medium heat. After foods are browned or cooked, 
transfer cooking pot to heating base. NOTE: Use only plastic, rubber, wooden, 
or non-metal cooking tools in the cooking pot. Use of metal cooking tools will 
scratch the non-stick surface. 
3.  Attach cord to base, then plug cord into a 120 volt, AC electric outlet only. The 
heating base will beep when plugged in. Nothing will show on the display until 
the “POWER” button is pressed. 
4.  Press the “POWER” button.  “SEL” will be displayed and “LO” temperature 
setting is indicated with a flashing light. If you do not select a setting within 5 
seconds, the slow cooker will default to “LO,” 9 hours. 
5.  Press “TEMP” to select “HI,” “LO,” keep warm “WM” or “Griddle” setting.  Note: 
Only “HI” or “LO” settings are available for programmed cooking times. Any time 
the “TEMP” button is pressed, the time will reset to the default for that setting; 
“LO,” 9 hours and “HI,” 5 hours. 
6.  Press ”TIME” button to scroll up to desired cooking time. You cannot program 
the Versatility™ Slow Cooker to cook for longer than 12 hours. Note: The time 
can be cycled from 1-12 hours. The clock starts at the default time; press the 
“TIME” button past 12 hours to cycle to 1 hour.  
• 
The timer, once set, will count down in minutes. If the “TIME” button is 
pressed at any point, the time will cycle up to the next whole hour, and 
then will increase in 1 hour increments. 
7.  Press “COOK” to start the cooking cycle. If “COOK” hasn’t been pressed within 
5 seconds, the base will beep 5 times, indicating that it has begun the cooking 
cycle. When the cooking cycle is completed, the program will shift to the keep 
warm “WM” setting and timer will count up from zero showing the elapsed time 
on warm. Note: The keep warm “WM” setting will automatically shut off after 24 
hours of heating. 
8.  Press the “POWER” button to turn the appliance off. Pressing “POWER” at any 
point in any cooking cycle, or keep warm “WM,” will turn the appliance off. All 
settings will then be reset back to default when power is turned back on. No 
previous settings are saved when the 6 Qt. Versatility™ Cooker is powered off.     
9.  Slow cooker base offers heat settings of keep warm “WM,” “LO,” “HI,” and 
“GRIDDLE.”  “WM” should only be used to keep cooked foods warm for serving, 
whereas “LO” and “HI” are to be used for actual cooking of foods. NOTE: DO 
NOT USE THE KEEP WARM “WM” SETTING FOR ACTUAL COOKING OF 
RAW FOODS AS THE SLOW COOKER WILL NOT GET HOT ENOUGH TO 
COOK FOODS.  DO NOT USE THE GRIDDLE SETTING FOR SLOW 
COOKING AS OVERCOOKING WILL OCCUR. 
10.  Select heat setting and cook food for recommended time as given in recipe or 
the temperature guide below. As a general guideline, most meat and vegetable 
combinations need 7 to 10 hours of cooking at “LO,” or 4 to 6 hours of cooking 
at “HI.” Meats will become most tender when cooked for the longer time at the 
lower heat setting. Avoid removing cover when slow cooking as cooking time will 
be increased due to loss of heat. Remove cover only when needed to stir 
occasionally or when adding ingredients.