West Elm Deep Picture Ledges - 3' and 4' Shelf Instrução De Montagem
mounting instructions
: deep picture ledge
NOTE:
• Stud mounting is recommended wherever possible.
Use proper hardware for your wall type (such as
anchors for drywall). When in doubt, consult your
local hardware store. For your safety, installation by
two people is recommended.
• Designed to be used for decorative items only.
• Maximum load on 3' shelf is 20lbs stud mounted/15lbs drywall mounted
Maximum load on 4' shelf is 20lbs stud mounted/15lbs drywall mounted
• Wipe with a soft, dry cloth. To protect the finish, avoid
the use of all chemicals and household cleaners.
• Stud mounting is recommended wherever possible.
Use proper hardware for your wall type (such as
anchors for drywall). When in doubt, consult your
local hardware store. For your safety, installation by
two people is recommended.
• Designed to be used for decorative items only.
• Maximum load on 3' shelf is 20lbs stud mounted/15lbs drywall mounted
Maximum load on 4' shelf is 20lbs stud mounted/15lbs drywall mounted
• Wipe with a soft, dry cloth. To protect the finish, avoid
the use of all chemicals and household cleaners.
31492/31617/31435/31443 - 08.31.09
page 1 of 1
drywall anchor 3x
screw 3x
A
B
! For drywall mounting, use anchors with screws.
For stud mounting, use screws only.
1. This shelf comes with a paper template which can be used to
locate the position of the shelf on your wall and mark the insertion
points of the mounting hardware. The template outline indicates
the line of the shelf edge at the wall. The centerpoints are toward
the top of the shelf and indicate the point of insertion for the
drywall anchors and screws.
2. Temporarily tape the template to the wall with the outline
indicating the desired location of the shelf. Use a carpenter’s level
to make sure the shelf edges are level.
3. Using a pin, poke throught the template into the drywall at the
center points to mark the locations on the wall. Remove the
template.
4. For stud mounting, skip to step 5. For drywall mounting: using a
philip's head screwdriver, insert the drywall anchors (A) into the wall
at the insertion points. Turn clockwise until anchors are flush with
the wall.
5. Insert screws through the shelf bracket into the anchors or
directly into studs at the insertion points and tighten until firmly
secure.
6. Align picture ledge with shelf bracket and slide shelf down until
securely fastened to bracket.
template outline
center points
top
anchor
screw
shelf bracket
picture ledge