Wasp Bar Code WDT3200 Manual Do Utilizador
WDT 3200 Product Reference Guide
12
Align the Screen
When prompted, use the stylus to tap the targets as they appear in order to align
the touch screen.
the touch screen.
When you complete the procedure, press any key or press anywhere on the touch
screen to start up the WinCE system. Examples of the align prompts are shown
below:
screen to start up the WinCE system. Examples of the align prompts are shown
below:
Adjusting Screen Brightness
To adjust the original default setting of the screen brightness, the backlight setting
will be required. Please refer to page 21 for the new setting procedure.
To adjust the original default setting of the screen brightness, the backlight setting
will be required. Please refer to page 21 for the new setting procedure.
Setting Time Zone/ Date
Before using the WDT3200 please take a few minutes to set the time and date so
that data can be properly time-stamped.
Before using the WDT3200 please take a few minutes to set the time and date so
that data can be properly time-stamped.