Woodstock SHOP FOX W1680 Manual Do Utilizador

-9-

While the main components of the Shop Fox

®

W1680 Drill Press are assembled at the factory, some

assembly is required. The following is the recommended sequence best suited for final assembly.

TOOLS REQUIRED: You will need a 

11

⁄

16

" open end wrench, a rubber or wooden mallet and a 5mm Allen

®

wrench (supplied).

Ensure machine is unplugged!

Secure base to floor with the appropriate
anchor bolts (not included). See Figure 7.

Secure base to a 4' x 4' x 

3

⁄

4

" sheet of ply-

wood. Base should be positioned along the
back edge of plywood and centered from
side to side as in Figure 8. Use base to lay
out hole pattern. Drill holes and secure base
to plywood with carriage bolts.

Place the column on the base and line up
the 4 mounting holes. Secure tightly with
the three M10-1.5 x 40mm hex head bolts
included using the open end wrench provid-
ed.

Figure 7. Secure base to floor.

Figure 8. Secure base to plywood.

The W1680 Drill Press is a floor model and

should be secured to the floor or the base should
be extended with plywood to maximize stabili-
ty. The use of a mobile base is not recommend-
ed.