Windsor Chariot Scrubber 10061090 Manual Do Utilizador

86317500 CHARIOT SCRUBBER 11/15/08 

 
The Chariot® is a battery powered, self-propelled, 
hard floor scrubber intended for commercial use.  
The appliance applies a cleaning solution onto a 
hard floor, scrubs the floor with brushes, and then 
vacuums the soiled water back into the recovery 
tank. 
 
The machine's primary systems are the solution 
system, scrub system, recovery system, and 
operator control system. 
 
The function of the solution system is to store 
cleaning solution and deliver it to the scrub system. 
The solution system consists of the solution tank, 
strainer, pump, valve.  The solution tank stores 
cleaning solution (water and detergent) until it is 
delivered to the scrub system.  The strainer protects 
the pump from debris.  The valve automatically 
prevents solution flow unless the scrub brushes are 
turned on and the machine is being propelled.   
 
The function of the scrub system is to scrub the 
floor.  The disk scrub system consists of two rotary 
type disk scrub brushes, motors, scrub deck skirt 
and lift actuator. The brushes scrub the floor as the 
motors drive the brushes.  The brush drive hubs 
allow the scrub brushes to follow irregularities and 
changes in the floor without loosing contact with the 
floor.  The scrub deck skirts control the cleaning 
solution on the floor so that the squeegee can pick it 
up. 
 
The scrub plus system consists of two cylindrical 
type brushes, motors, scrub deck side squeegees, 
hopper, lift actuator.  The cylindrical scrub head is 
designed to eliminate debris that may be caught in 
the squeegee while scrubbing.  Water is applied to 
the first scrubbing brush turning in a clockwise 
rotation when viewed from the right side of machine.  
The first brush scrubs dirt and debris between the 
brushes.  The second scrubbing brush, turning in a 
counter clockwise rotation, picks up debris and 
throws it into a removable hopper.  Water is allowed 
to drain out the hopper into the squeegee path 
where it is recovered from the floor.     

 
The scrub deck side squeegees control the cleaning 
solution on the floor so that the squeegee can pick it 
up. 
 
The function of the recovery system is to vacuum 
the soiled water back into the recovery tank.  The 
recovery system consists of the squeegee, vacuum 
motor, float ball filter, recovery bag.  The squeegee 
wipes the dirty solution off the floor as the machine 
moves forward.  The vacuum motor provides suction 
to draw the dirty solution off the floor and into the 
recovery bag.  The float ball filter protects the 
vacuum fan from debris and foam.  The recovery 
bag stores the dirty solution.   
 
The function of the operator control system is to 
control the direction and speed of the machine. The 
directional control system consists of the direction 
control drive reset switch, throttle pedal, emergency 
stop/brake switch, steering wheel, propel controller, 
and drive wheel. The directional control drive reset 
switch signals forward or reverse direction and 
makes sure the operator is on platform before 
machine will propel. The controller interprets signals 
from the throttle pedal to command the drive wheel 
to propel or slow the machine.  The steering wheel 
points the drive wheel in the direction desired by the 
operator. The parking brake automatically engages 
when the operator steps off the platform.  The 
emergency stop/brake can be used to hold the 
machine on slopes.