Wiebetech SS8 Manual Do Utilizador

 

   

W i e b e T e c h   L L C  

 

 

Step 1: Select 

 then choose the RAID Level desired.  After 

choosing the RAID level, click 

. It will take you to step 2 for 

Bus ID

, 

SCSI ID

, and 

LUN

 setup. 

 

Step 2: In this step, the volume can be customized as needed. 

Volume size, Bus 

ID

, 

SCSI ID

, and 

LUN

 can be assigned specified numbers to be attributed to the 

volume. The maximum volume size is shown as default.  The volume can only be 
less or equal to the number shown. By default, the 

Bus ID

, 

SCSI ID

, and 

LUN

 are 

set at 0. These numbers can be changed by the pull down menu. Click 

 after desired volume size and IDs are set. 

 

Note 
Other UDVs can be created by Quick Install. The remaining capacity 
from the Volume Group will be shown and the controller will determine 
the next ID settings to avoid conflicts with other UDVs. 

Step 3: Confirm page. Click 

 if all settings are correct.  

 

Done: A summary page with the User data volume will be shown as Figure 4.3.1.