West Bend L5674B Manual Do Proprietário

Página de 40
 
 
 
 
“SET DELAY” 
“SET” 
“HOURGLASS” 
“ADD WATER” 
Press to set 
the delayed 
steaming time. 
Indicates the 
delayed 
steaming 
time. 
Indicates how 
long the timer 
has to count 
down to 0:00 
Indicates the steamer does not 
have enough water to complete 
the steaming cycle. 
 
 
 
STEAMING  
 
1.  Place the heating base on a dry, level, heat resistant surface, away from any 
edge.  Note: As food cooks, steam will come out of appliance.  To prevent 
possible damage, do not place steamer directly under cabinets. 
2.  Add cold water to the desired level or as shown in the cooking chart.  Note: 
Never start the steamer without water or with water below the “MIN” line or 
above the “MAX” line.   
3.  Place the drip tray in theheating base.  Note: The drip tray must always be used 
when steaming foods or cooking rice. 
4.  Place food items in the food baskets or rice bowl.  Place the food basket on top 
of the drip tray making sure the drip tray and food basket are aligned properly.  If 
you are using multiple food baskets, lay a separator ring on top of the bottom 
food basket and snap the second food basket in place.  Make sure the separator 
ring is completely snapped on to the upper basket and all baskets line up 
properly.  If using the second and third baskets repeat this procedure.  If you are 
using the rice bowl, place the rice bowl inside any of the food baskets being 
used.  Always place the cover on the top basket being used. 
5.  Plug the cord into a 120 volt, AC electric outlet only.  The appliance 
will beep and display a cooking time of 10 minutes and the display 
will read “OFF.”  Note:  If the steamer is left idle for 5 minutes or 
more, the digital display will turn off.  Press any button on the 
steamer to reactivate the display.   
Pressing the “STEAM TIME” buttons will adjust the steaming time up or down 
between 00 and 90 minutes.  Note: Hold either button down to scroll quickly.  
See the steaming chart for approximate cooking times. 
6.  When the timer is at the desired steaming time, press the 
“START/STOP”
 
button to begin steaming.  The “STEAM” icon will 
appear in the display to indicate steaming has begun.
  
To cancel 
steaming, press the “START/STOP”
 
button again.
5