White Rodgers UP400 Manual Do Utilizador

You can customize the look of the thermostat by changing the
faceplate color.

1.  Remove the white faceplate. Insert a small screwdriver into each of
  the 4 slots located on both sides of the thermostat, and pop up
  the white cover

in all 4 spots

2. Select a color from the inserts provided in the package.
3. Put the clear cover on a fl at surface

face down

4. Fit the selected insert onto the 4 tabs located on the inside of the
clear cover. Be sure the insert is properly aligned. Do not bend the
insert

excessively.

5. Flatten/spread the insert gently with your fi ngers into the clear cover.

The insert should rest securely attached to the tabs, even if you

turn the cover upside-down.

6. Snap the faceplate (with the insert in it) onto the thermostat.
Make sure the cover tabs align with the installation slots in
the

thermostat.

Your thermostat was accurately calibrated at the factory. However,
if you would like the displayed temperature to read higher or lower than
the actual temperature, you can adjust the displayed temperature
by +/- 4 degrees.

To adjust the actual temperature display:

1. Press the MENU icon, then press MORE OPTIONS.
2. Continue to press the MORE OPTIONS icon until you reach option

#10.
3. Use the to adjust the displayed temperature; from
4:LO to 4:HI.
4. Press DONE.

Clear cover

Thermostat

Insert

Installation

Slots

Tabs

4.12 Adjust actual temperature display

4.13 Change faceplate color