Whirlpool TGS325E Manual Do Utilizador
10
TIMER
BAKE
BROIL
START ?
HEAT
ON
DOOR LOCKED
BAKE
TIME
TIMER
CLOCK
CLOCK
OFF
CANCEL
CANCEL
START
5 SEC
ENTER
SELF
CLEAN
SELF - CLEANING O
SELF - CLEANING OVEN
CLEAN
BROIL
T
HE
ELECTRONIC
OVEN
CONTROL
Bake pad
(p. 13)
(p. 13)
Using the control lock
The control lock lets you disable the control panel
command pads. The control lock comes in handy
when you want to prevent others from using
the oven.
command pads. The control lock comes in handy
when you want to prevent others from using
the oven.
NOTES:
•
You can only use the control lock when the oven
is not in use or the control has not been set.
is not in use or the control has not been set.
•
Set the control lock when cleaning the control
panel to prevent yourself from accidentally turning
on the oven.
panel to prevent yourself from accidentally turning
on the oven.
•
You must reset the control lock if the power goes
out for more than 1 second.
out for more than 1 second.
To lock the control panel:
Press and hold the start/enter pad for 5 seconds.
Press and hold the start/enter pad for 5 seconds.
You will hear a single tone and “Loc” will
appear on the temperature display for
5 seconds. “Loc” and “START?” will
then appear whenever a command pad
is pressed.
appear on the temperature display for
5 seconds. “Loc” and “START?” will
then appear whenever a command pad
is pressed.
To unlock the control panel:
Press and hold the start/enter pad for 5 seconds.
Press and hold the start/enter pad for 5 seconds.
You will hear a single tone and “Loc” and
“START?” will disappear from the tempera-
ture display.
“START?” will disappear from the tempera-
ture display.
Temperature/
time pads
(pp. 11, 13,
16, 18, 23)
time pads
(pp. 11, 13,
16, 18, 23)
Broil pad
(p. 17)
(p. 17)
Self clean
pad
(p. 23)
pad
(p. 23)
Display
•
When you first plug in the range, “PF” will appear
on the display until you press any command
pad. If “PF” again appears on the display, your
electricity was off for a while. You will need to
reprogram any temperature adjustments you may
have made. See the “Adjusting the oven tempera-
ture control” section.
on the display until you press any command
pad. If “PF” again appears on the display, your
electricity was off for a while. You will need to
reprogram any temperature adjustments you may
have made. See the “Adjusting the oven tempera-
ture control” section.
•
When you are using the oven, the display will
show preheat times and temperature settings.
show preheat times and temperature settings.
•
When you are not cleaning or cooking with the
oven, the display will show the time of day.
oven, the display will show the time of day.
•
When setting a function, if you do not press the
start/enter pad within 5 seconds, the Start?
indicator light will flash. If you do not press the
start/enter pad within 5 minutes, the function will
be canceled.
start/enter pad within 5 seconds, the Start?
indicator light will flash. If you do not press the
start/enter pad within 5 minutes, the function will
be canceled.
Indicator lights
An indicator light to the left of the display lights up
when you are in a setting. An indicator light on the
display lights up when the oven is on.
when you are in a setting. An indicator light on the
display lights up when the oven is on.
Electronic
display
Start/enter pad
(p. 12)
Off/cancel pad
(p. 12)
Clock/timer pads
(pp. 11-12)
(pp. 11-12)
USING YOUR RANGE
START
5 SEC
ENTER
START
5 SEC
ENTER
Indicator lights
(see below)