Whirlpool RS610PXE Manual Do Utilizador
4
Range Safety
IMPORTANT SAFETY INSTRUCTIONS
w
WARNING
To reduce the risk of fire, electrical shock,
injury to persons, or damage when using
the range, follow basic precautions,
including the following:
injury to persons, or damage when using
the range, follow basic precautions,
including the following:
General
•
Read all instructions before using
the range.
the range.
•
Install or locate the range only in
accordance with the provided
Installation Instructions. The
range must be installed by a
qualified installer. The range
must be properly connected to
electrical supply and grounded.
accordance with the provided
Installation Instructions. The
range must be installed by a
qualified installer. The range
must be properly connected to
electrical supply and grounded.
WARNING:
To reduce the risk of
tipping of the appliance, the appli-
ance must be secured by properly
ance must be secured by properly
You will be killed or seriously injured
if you don’t follow instructions.
if you don’t follow instructions.
You can be killed or seriously injured
if you don’t follow instructions.
if you don’t follow instructions.
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your
appliance. Always read and obey all safety messages.
appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to hazards that can kill or hurt you and others.
All safety messages will be preceded by the safety alert symbol and the
word “DANGER” or “WARNING.” These words mean:
word “DANGER” or “WARNING.” These words mean:
w
DANGER
w
WARNING
All safety messages will identify the hazard, tell you how to reduce the chance of injury,
and tell you what can happen if the instructions are not followed.
and tell you what can happen if the instructions are not followed.
installed anti-tip devices. To
check if the devices are installed
properly, open the oven door,
remove a screw at the bottom of
each side trim, remove the side
trims, and verify that the anti-tip
devices are engaged to cabinets
with two screws through the
mounting holes in the mounting
rail of the oven.
check if the devices are installed
properly, open the oven door,
remove a screw at the bottom of
each side trim, remove the side
trims, and verify that the anti-tip
devices are engaged to cabinets
with two screws through the
mounting holes in the mounting
rail of the oven.