Whirlpool RS610PXE Manual Do Utilizador
41
3.
Hold the coil element as level as possible
with the terminal just started into the
receptacle. Push the coil element termi-
nal into the receptacle.
with the terminal just started into the
receptacle. Push the coil element termi-
nal into the receptacle.
4.
When terminal is pushed into the recep-
tacle as far as it will go, push down the
edge of the coil element opposite the
receptacle. The element hold-down clip
will keep the coil element from moving
around.
tacle as far as it will go, push down the
edge of the coil element opposite the
receptacle. The element hold-down clip
will keep the coil element from moving
around.
NOTE:
Reflector bowls reflect heat back
to the cookware on the coil elements. They
also help catch spills. When they are kept
clean, they reflect heat better and look
new longer.
also help catch spills. When they are kept
clean, they reflect heat better and look
new longer.
If a reflector bowl gets discolored, some of
your cookware may not be flat enough, or
some may be too large for the coil element.
In either case, some of the heat that’s meant
to go into or around the cookware goes
down and heats the reflector bowl. This
extra heat can discolor it.
some may be too large for the coil element.
In either case, some of the heat that’s meant
to go into or around the cookware goes
down and heats the reflector bowl. This
extra heat can discolor it.
C A R I N G F O R Y O U R R A N G E
Replacing
1.
Make sure all coil elements are off and
cool before replacing the coil elements
and reflector bowls.
cool before replacing the coil elements
and reflector bowls.
2.
Line up openings in the reflector bowl
with the coil element receptacle and the
element hold-down clip.
with the coil element receptacle and the
element hold-down clip.