Whirlpool RF3020XE Manual Do Utilizador

Página de 32
25
CARING FOR YOUR RANGE
R
EMOVING
 
THE
 
OVEN
 
DOOR
 
(
CONT
.
)
To replace:
NOTE:
 The nails or screws you inserted must still be
in both sides of the door.
1.
Grasp the door on the sides with your fingers on
the front of the door and your thumbs on the
inside surface.
2.
Rest the hinge hanger so that it is flat (at the
bottom of the hinge hanger on the bottom of the
front frame slot).
3.
Position the door with the hinge hanger slots
almost parallel to the front frame.
4.
Push up and in until the hinge hanger slots
become fastened to the range. Lower the door
and rotate it slightly from the front to the back
until the slots are fully fastened. The hinge
hanger will be close to the bottom of the front
frame slot.
5.
Pull door open about halfway and remove the
nails or screws.
6.
Close the door.
Range
Hinge
hanger
Hinge
hanger
flat
Remove nail
or screw
Front frame
slot bottom
In
Up
Oven door