Whirlpool WFG231LVB Guia De Configuração Rápida

1. Open broiler door and remove broiler pan. The gas pressure 

regulator is located in the back right hand corner of the broiler 
compartment.

IMPORTANT: Do not remove the gas pressure regulator.

NOTE: Do not remove the spring beneath the cap.

2. Remove the cap from the gas pressure regulator using a 

flat-blade screwdriver.

NOTE: Be sure sealing washer remains in the same position.

3. To convert to LP gas, unscrew the plastic adjustment screw 

by hand, turn it over, and screw it in again.

4. Reinstall the cap.

1. Remove burner grate, burner caps and burners. 

2. Locate LP gas orifice spuds for top burners in the bag 

containing literature included with the range. Three LP gas 
spuds are stamped “78,” and two are stamped “80.”

3. Remove Natural gas orifice spuds using a 7 mm combination 

wrench.

4. Install LP gas orifice spuds using a 7 mm combination 

wrench.

NOTE: Depending on model, the range cooktop may be 
equipped with 4 standard burners, 3 standard burners and 
1 power burner, or 3 standard burners, 1 power burner and 
1 center burner. Spud size/location remain the same.

A

A

A

C

B

A

B

C

A

B

A

B

C

D

E