Whirlpool SF216LXSQ Guia De Configuração Rápida
14
2. Remove the cap from the gas pressure regulator using a
flat-blade screwdriver.
NOTE: Make sure sealing washer remains in the same position.
NOTE: Make sure sealing washer remains in the same position.
3. To convert to LP gas, unscrew the plastic adjustment screw
by hand, turn it over, and screw it in again.
4. Reinstall the cap.
To Convert Surface Burners
1. Remove burner grate, burner caps and burners.
2. Locate LP gas orifice spuds for top burners in the bag
containing literature included with the range. Three LP gas
spuds are stamped “78,” and two are stamped “84.”
spuds are stamped “78,” and two are stamped “84.”
3. Remove Natural gas orifice spuds using a 7 mm combination
wrench.
4. Install LP gas orifice spuds using a 7 mm combination wrench.
NOTE: Depending on model, the range cooktop may be
equipped with 4 standard burners, 3 standard burners and
1 power burner, or 3 standard burners, 1 power burner and
1 center burner. Spud size/location remain the same.
equipped with 4 standard burners, 3 standard burners and
1 power burner, or 3 standard burners, 1 power burner and
1 center burner. Spud size/location remain the same.
5. Place the Natural gas orifice spuds in the parts bag for future
use and keep with the bag containing literature.
6. Reinstall burners, burner caps and burner grates.
To Convert Oven Burner
1. Open the oven door and remove oven racks, oven tray, flame
spreader and set aside.
2. Lift oven burner. The orifice spud is behind the oven burner
air shutter.
3. Locate LP gas orifice spud stamped “56” in the bag
containing literature supplied with the range.
4. Use a 7 mm combination wrench and remove the Natural gas
orifice spud.
5. Install the number “56” LP gas spud.
IMPORTANT: Do not overtighten.
6. Place Natural gas oven burner spud in plastic parts bag along
with Natural gas cooktop burner spuds for future use and
keep with the bag containing literature.
keep with the bag containing literature.
7. Reinstall oven burner.
8. Reinstall oven racks, oven tray and flame spreader.
A. Cap
Inlet pressure
to Natural gas
to Natural gas
Inlet pressure
to LP gas
to LP gas
A. Cap
B. Sealing washer
B. Sealing washer
C. Adjustment screw
A. Burner cap
B. Burner
B. Burner
C. Center burner
A. Spud
B. Holder
B. Holder
A
A
C
B
180º
A
B
C
A
B
A. Standard burner - LP gas orifice spud number 78
B. Power burner - LP gas orifice spud number 84
B. Power burner - LP gas orifice spud number 84
C. Center burner - LP gas orifice spud number 84
D. Standard burner - LP gas orifice spud number 78
D. Standard burner - LP gas orifice spud number 78
E. Standard burner - LP gas orifice spud number 78
A. Oven burner
B. Air shutter
B. Air shutter
A. LP oven orifice spud stamped with “56”
A
B
C
D
E
B
A
A