Whirlpool GMC275PD Manual Do Utilizador

Página de 28
6. 
7. Set the start time.
Press the “up” (
) or “down” (
) pad(s) until 
the correct time shows on the display.
The following example shows a chosen start time
of 2 o’clock. The oven will shut off by itself at 2:30
(the set start time plus the set cook time).
8. 
NOTE: You can change the temperature or 
time settings any time after pressing START/
ENTER by repeating Steps 2 through 7.
9. When the start time is reached:
You will hear a 1-second tone. The display will
count down the baking/roasting time in hours and
minutes (if the cook time is more than one hour) or
in minutes and seconds (if the cook time is less
than one hour).
To delay start and stop automatically:
1. Place the oven rack(s) where you need
them and put your food in the oven.
To place your racks correctly, see “Positioning
racks and pans” in “Using the oven” earlier in this
section.
2. 
3. Set the temperature (optional).
Do this step if you want to set a temperature other
than 350°F. Press 
to raise the temperature or 
to lower the temperature in 5°F amounts. Use these
pads until the temperature you want shows on the
small display.
4.
5. Set the cook time.
Press the “up” (
s
) or “down” (
t
) pad(s) until the
correct time shows on the display.
16
PRESS
YOU SEE
F
BAKE
START
TIME
DELAY
START
TIME
PRESS
YOU SEE
HR 
MIN 
F
BAKE
START
TIME
(example shows 2 o’clock 
start time)
PRESS
YOU SEE
START
ENTER
YOU SEE
ON
F
BAKE
HEAT
TIME
COOK
(display counts down
cook time)
F
BAKE
DELAY
PRESS
YOU SEE
COOK
TIME
PRESS
YOU SEE
HR 
MIN 
USING YOUR OVEN
F
BAKE
TIME
COOK
F
BAKE
TIME
COOK
(example shows 30-minute
baking/roasting time)
PRESS
YOU SEE
TEMP 
F
BAKE
(example shows Bake at 375°F)
BAKE
F
BAKE
PRESS
YOU SEE