Westinghouse EPA (49 state) WH6500E Manual Do Proprietário

ASSEMBLY

ASSEMBLY

Before assembling the generator,

review Safety on page 7 and the

following safety messages.

CAUTION

Never lift the generator without

assistance. The generator is heavy and

lifting without assistance could result

in personal injury.

Never use the handles as a lifting

point to support the entire weight of

the generator. Only use the handles

to move the generator by lifting the

handles and using the wheels to move

the generator.
Use caution when collapsing the

handles. Hands and fingers could get

caught and pinched.

NOTICE

Assembling the generator will require lifting the unit

on one side. Make sure all engine oil and fuel are

drained from the unit prior to assembling.
Once assembled, the wheel kit is not intended for

on-road use. The wheel kit is designed for use on this

generator only.

Tools required – tool bag (included).

1. Place generator on a flat surface.
2. Place a piece of cardboard or other soft material

to tip the generator onto, to protect the frame

paint and prevent the generator from sliding. Tip

the generator onto its side as shown in Figure 4

(engine should be on the bottom).

Figure 4 – Tip the Generator onto its Side