Western Digital My Cloud EX2 Manual Do Utilizador

CONFIGURING SETTINGS

111 

WD MY CLOUD EX2 PERSONAL CLOUD STORAGE
USER MANUAL

2.   If you made any changes, click Save (appears next to the updated field once a change 

is made).

Note:  Throughout the WD My Cloud EX2 dashboard, the Save and Cancel 

buttons display only if you make changes.

Language and Clock

In this section of the General screen, you can change the language that displays in the 

 

WD My Cloud EX2 device’s interface and set the date and time. The date and time are 
synchronized to the NTP (Network Time Protocol) server by default. You have the option of 
setting the date and time manually or allowing the NTP to access the Internet and 
automatically set the time. If you are not connected to the Internet, you must enter the date 
and time manually.

1.   In the Language & Clock section, view or modify the following settings

:

2.   Click Save for each change you make.

Language

From the drop-down list, select the language you’d like to 
display on your WD My Cloud EX2 Personal Cloud 
Storage web pages. The default language is English. 

Time Zone

From the drop-down list, select the time zone where your 
device is located.

NTP Service

Enable or disable NTP service, which automatically 
synchronizes your device to update the time and date. A 
dialog box displays current NTP servers. You can add 
another NTP server if you choose.

Primary Server

Change the primary server used for your NTP service.

• To change the primary server used for your NTP 

service, click 

,

• Click 

, and then enter the URL address of 

the new primary server.

• Click 

.

Date & Time

Displays the device date and time. This information is 
synchronized to the NTP (network time protocol) server by 
default. 

Time Format

From the drop-down list, select 12 (12-hour clock) or 24 
(24-hour clock).