Western Digital My Cloud EX2 Manual Do Utilizador

REPLACING A DRIVE

 135 

WD MY CLOUD EX2 PERSONAL CLOUD STORAGE 

 

USER MANUAL

Inserting a Drive

Preparing a Drive

The My Cloud EX2 comes with a bag holding the screws, tabs, and labels needed for 
inserting the new drive. For WD replacement drives, you can reuse the parts attached to the 
faulty drive.

A standard phillips-head screwdriver is all you need..

1.   Using a screw from the bag, attach a plastic tab to the top hole in the drive’s side (on the 

right if the green board is facing you). 

2.   Attach a screw to the corresponding hole on the other side of the drive.

3.   Attach label 1 or 2 to the top of the drive. Label 1 is on the left and label 2 is on the right, 

when looking down on the top of the unit. There are corresponding numbers on the 
cross brace label.

Inserting One or Both Drives

To avoid electrostatic discharge (ESD) problems, ground yourself by 

touching metal before handling the device.