Welch Allyn Medical Diagnostic Equipment Medical Alarms 8.1x Manual Do Utilizador
162
Chapter 10 Troubleshooting and maintenance
Welch Allyn Acuity Central Monitoring System
Identify or change a Micropaq monitor network name
To identify a Micropaq monitor network name
1.
Press
to highlight SYSTEM INFORMATION, and then press
.
The System Information menu appears.
2.
Press
to highlight NETWORK STATUS, and then press
.
The Network Status screen appears.
3.
Locate the Network Name in the list.
4.
Press
to
exit.
To change a Micropaq monitor network name
1.
Press
repeatedly until SERVICE MENU is highlighted, and then press
.
The Service menu appears.
2.
In this sequence and not too rapidly, press and hold these keys:
,
and .
An ARE YOU SURE? prompt appears.
3.
Press
to highlight YES, and then press
.
A Network Name menu appears.
4.
Press
or
to highlight the desired network name.
5.
Carefully confirm that the highlighted name matches the appropriate Acuity System
network name.
network name.
6.
Press .
The Micropaq monitor turns off and on again, and then it attempts to connect to the
Acuity System network.
Acuity System network.