Welch Allyn Medical Diagnostic Equipment Medical Alarms 8.1x Manual Do Utilizador
Directions for use
Chapter 2 Acuity System overview
23
Virtual Monitor
An Acuity System Virtual Monitor represents a patient monitor and the information
obtained from the monitor. The appearance and button sequences can differ from the
actual patient monitor.
obtained from the monitor. The appearance and button sequences can differ from the
actual patient monitor.
Options or monitor functions that are not available are shown in faint gray type.
MCO
2
indicates mainstream CO
2.
SCO
2
indicates sidestream CO
2
.
Bells appear in larger numeric zones.
•
•
Solid bell indicates that all of this vital sign’s alarm limits are set.
•
Half-shaded bell indicates that some of this vital sign’s alarm limits are set.
•
Bell missing from larger numeric zone indicates that none of this vital sign’s
alarm limits are set.
alarm limits are set.
Up to eight labeled numeric displays
Buttons are visible when the pointer is within the window. Options or monitor
functions that are not available or active are shown in faint gray type.
•
functions that are not available or active are shown in faint gray type.
•
Setup: Opens setup windows for Patient ID, Alarms, Printouts, Waveform
Window, Arrhythmia Alarms, and ST Analysis.
Window, Arrhythmia Alarms, and ST Analysis.
•
Review: Opens review windows for Graphical Trends, Tabular Trends/Events,
Waveforms, Arrhythmia Events, and OxyCRG.
Waveforms, Arrhythmia Events, and OxyCRG.
•
Suspend: Suspends an audible alarm tone for 90 seconds.
•
Snapshot: Prints a snapshot at the Acuity Central Station printer.
Alarm and alert messages replace patient mode indicator.
Patient/monitor status icon. For details about all status icons, see
Up to three waveform display areas
For patient monitors that include Masimo SpO
2
measurement capabilities,
indicator beneath SpO
2
wave is Signal IQ
TM
. For more information, refer to Masimo
Corporation literature.
The adjacent waveform is derived from this ECG lead. If you want to review
waveforms from all leads, click Review, Waveforms to open the Waveforms
Review window.
waveforms from all leads, click Review, Waveforms to open the Waveforms
Review window.
Red, patient alarm; Yellow, equipment or patient alert; Green, patient vital signs
within limits and normal equipment operation; Blue, intentional disconnection
within limits and normal equipment operation; Blue, intentional disconnection
F. Patient/
monitor
status icon
D. Buttons
B. Bells
C. Numerics
A. CO
2
H. ECG lead
E. Patient
mode/
messages
mode/
messages
I. Color indicates status.
G. Waveforms