Welch Allyn Medical Diagnostic Equipment Medical Alarms 8.1x Manual Do Utilizador
Directions for use
Chapter 4 Adjust monitoring settings and patient information
51
Adjust a patient’s waveform displays
You can select waveforms for display in a patient’s Virtual Monitor and Waveform Window.
To adjust waveform displays for a patient’s Virtual Monitor
You can select or deselect up to three vital-sign waveforms for viewing.
1.
In the patient’s Virtual Monitor, click MAIN MENU, MORE, WAVE SEL.
2.
Click NEXT to highlight a waveform.
3.
Click ON/OFF.
To adjust waveform displays for a patient’s Waveform Window
1.
In the patient’s Virtual Monitor, click Setup, Waveform Window.
The Waveform Window Setup window appears.
2.
Click 1 or 2 to select the number of waveforms to display in the Waveform Window.
3.
Check a vital-sign box to display a waveform.
If ECG is monitored, it is always displayed and cannot be deselected.
NIBP is selected for display if it is the only vital sign monitored.
Copy of the Waveform Window
These open the Alarms, Printouts, Waveform Window, Arrhythmia
Alarms and ST Analysis Setup windows.
Closes the patient’s
Waveform Window
on the Acuity Central
Station screen.
on the Acuity Central
Station screen.
Note: If you need to
close a Waveform
Window from a
Patient List Review
(PLR) station, see
Window from a
Patient List Review
(PLR) station, see
.