ViewCast Oven 4100 Manual Do Utilizador
Niagara 4100 User Guide
ViewCast
23
Easy first time set up
You should read all instructions, notices, and warnings in the About This Guide section prior to getting
started with your new Niagara 4100 hardware for the first time. Also, ensure you have all required parts
and meet all system requirements before installing this product.
started with your new Niagara 4100 hardware for the first time. Also, ensure you have all required parts
and meet all system requirements before installing this product.
Do not continue with the installation if you find any components missing or damaged. Contact the
ViewCast reseller where you purchased your Niagara 4100 system for assistance in obtaining any
missing or replacement parts.
ViewCast reseller where you purchased your Niagara 4100 system for assistance in obtaining any
missing or replacement parts.
Connecting to an electrical power source
Niagara 4100 ships with one of the following power cables:
North America power cable
International power cable
UK power cable
To connect the power source:
1. Attach the block end to the power input located on the Niagara 4100 AC/DC adapter.
2. Plug the other end of the cable into a wall outlet or surge protection enabled power strip
connected to a wall outlet or other common power source.
WARNING! The plug-socket combination must remain accessible at all times as it serves as the main
disconnecting device.
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Do not work on the system or connect or disconnect cables during periods of lightning activity.
WARNING! When using 4-pin XLR to cigarette car plug cables, do not disconnect the car battery
adaptor or turn off the car engine before you turn off the appliance. Doing so may damage the
appliance.
appliance.