ViewCast Oven 4100 Manual Do Utilizador
Niagara 4100 User Guide
ViewCast
33
Checking CPU usage
When the Niagara 4100 is idle (no encoders are streaming), the CPU percentage is normally 4 % or less.
If one or more encoders are streaming, the percentage is much higher and fluctuates in a range of +/- 10
%. If the system is using less than 70 %, you may start another encoder without adversely affecting
system performance (depending on the complexity of the profile).
If one or more encoders are streaming, the percentage is much higher and fluctuates in a range of +/- 10
%. If the system is using less than 70 %, you may start another encoder without adversely affecting
system performance (depending on the complexity of the profile).
To check CPU usage:
1. Press Menu. The EASE menu appears.
2. Use the Up and Down arrow buttons to select Access Health.
3. Press Enter. The access menu appears (Figure 28).
Figure 28. Access menu
4. Use the Up and Down arrow buttons to select CPU.
5. Press Enter. A screen appears (Figure 29) with the amount of CPU cycles currently in use.
Figure 29. CPU cycles screen
6. Press Enter.