Toshiba 48-1250 A Manual Do Utilizador
TOSHIBA- 63
TX Series
48 - 1250A
MP.4
Status (Metering Page 4)
Displays the present status of the TX Series soft start.
Screen 1:
Displays the present state of the unit as
follows:
follows:
Screen 2: Displays the amount of time remaining
before an overload trip will occur.
Screen 3: Displays the amount of time remaining from
a thermal inhibit. The inhibit time comes
from the amount of thermal register
remaining versus the amount of thermal
capacity required to start.
from the amount of thermal register
remaining versus the amount of thermal
capacity required to start.
Screen 4:
Displays the coast down time remaining
(Backspin time). The time remaining depends
upon the user setting in Setpoint Page 8,
Coast Down Time.
(Backspin time). The time remaining depends
upon the user setting in Setpoint Page 8,
Coast Down Time.
Screen 5:
Displays the amount of time remaining before
a start command can be given.
a start command can be given.
Screen 6:
If the number of starts per hour has
exceeded the setting.
exceeded the setting.
Screen 1 Note:
CURRENT STATUS Screens include:
1. MOTOR STOPPED
READY TO START
2. MOTOR STARTING
MULT. OF FLA
3. MOTOR RUNNING
AT ###.## X FLA
4. LAST TRIP CAUSE
NONE (or trip cause)
5. PROGRAMMING
SETPOINTS
6. MOTOR STATUS
UNKNOWN STATE ### (displays relay state upon error)
CURRENT STATUS Screens include:
1. MOTOR STOPPED
READY TO START
2. MOTOR STARTING
MULT. OF FLA
3. MOTOR RUNNING
AT ###.## X FLA
4. LAST TRIP CAUSE
NONE (or trip cause)
5. PROGRAMMING
SETPOINTS
6. MOTOR STATUS
UNKNOWN STATE ### (displays relay state upon error)
(CURRENT STATUS)
O/L TRIP LEFT TO
TRIP: ###### SEC
TRIP: ###### SEC
THERM INH TIME LEFT
: #### MIN
: #### MIN
COAST DOWN TIMER
TIME LEFT: #:## MIN
TIME LEFT: #:## MIN
TIME BETWEEN STARTS
TIME: #:## MIN
TIME: #:## MIN
STARTS PER HOUR TIME
## ## ## ## ## ## ##
## ## ## ## ## ## ##
MENU
METERING PAGE 4
STATUS
STATUS
Screen 1 (See note at left)
Screen 2
Screen 3
Screen 4
Screen 5
Screen 6