OTC Wireless WIJET.G 802.11G Manual Do Utilizador

WiJET.G Technical Manual 

 

13

The WiJET.G can run as a Wi-Fi Infrastructure station and join an existing Wi-Fi 
Wireless Network. The benefits include that several WiJET.G units can join the same 
wireless network and thus the users can use the one-to-multiple display feature (one PC 
sending screen image displays to multiple WiJET.G units) For how to configure the 
WiJET.G running under Infrastructure station mode, please refer to the Web-based 
Administration Utility Configuration section in Chapter 4. 

 

Once you have successfully configured the wireless card to connect to the WiJET.G and 
when it is your turn to make a presentation, click “Establish a Session” and you should 
find yourself connected to the WiJET.G. There will be a confirmation window alerting you 
that your session is on, and your projector or monitor should now display your Desktop. 

  

 
Various abnormal conditions, such as RF interference or network time-out, however 
rare in occurrence, can cause the communication between the WiJET.G and the PSM 
to be interrupted. If an interruption of session is detected, WiJET.G will automatically try 
to reconnect and keep the user in session. In case of failing to keep the use in session, 
WiJET.G will return to the banner page and be available for a new session. Certain 
abnormal conditions that cause interruption of the link may be localized on the current 
presenter’s computer and/or its wireless card. If the anomaly persists but can be 
localized on the current presenter’s computer system, another presenter can still make 
use of the projector/monitor by clicking the “Establish a Session” button on his/her 
PSM. 
 
Note:  If the PC resolution is above 1024x768, the following message will be